Philips 55PP9352 Directions For Use Manual page 15

Digital equipment with a 1080i or 480p
output, is compatible with the HD INPUT-
A V 5 vMeo inputjactc ]71is page presents one
possible connection scenario. See the HD
receiver _ directions-fbr-use manual f!_r more
ir_fiwmation.
]b rnakz_the connections shown in this exw_q)le,
you will need:
• one DBI5 cable
• anS-VIDEO cuble
• /'bur cablesjbr audio connectiorls &tandard
RCA connectors)
• one couxial cable 175_2).
NOTE: "Hte cubles are not supplied with your 1_
You shouM be able to buy them at most stores
tbut sell electronics. Or you can call our
Customer Cure Center at 1-800-531-0039.
Connect S-VIDEO and audio cables.
NOTE: This example uses
INPUT-AV 1. You Call use INPUT-AV 2 or
the side input jacks if you would like.
• Connect all S-VIDEO cable from the HD
receiver's S-VIDEO jack to the TV's
INPUT-AV 1 S-VIDEO jack.
• Connect fi'Olnthe HI) receiver's AUDIO
L(efi) mid R(ight)jacks to the TV's
INPUT-AV l L(eft) and R(ight) AUDIO
jacks.
Connect the DBI5 video cable and audio cables to the TV's HD inputs.
• Connect fi'Olnthe DB 15 jack on the
receiver to the TV's HD INPUT-AV 5
DB15 jack.
• Connect fi'Olnthe HI) receiver's AUDIO
L(efi) and R(ight)jacks to the TV's
HI) INPUT-AV 5 L(efl) and R(ight)
AUDIO jacks.
Connect coaxial cables.
• Connect the coaxial cable lead-in from
your cable ootlet, cable converter box, or
VHF/UHF antenna to the receiver's
ANTENNA A IN jack. If desired, con-
nect the coaxial cable lead-in from anoth-
er RF sigmal _urce to the receiver's
ANTENNA B IN jack.
• Connect a coaxial cable from the OUT
TO TVjack to the ANTENNA IN 75f2
jack on the TV.
• Connect the coaxial cable lead-in fl'om a
satellite dish antenna to the SATELLITE
IN jack on the receiver.
Refer to the directions-fnr-use manual that came with the HD receiver for setup
instructions.
Connecting Accessory Devices to Your TV
This lelevision is designed to accept high-definition signal standards
1080i and 480p as specified by the Electronic Industries Association
standard EIA770,3, Because oulput standards may vary by manuPactuer,
you may encounler some digital equipment that will not properly dis-
play pictures on the TV.
Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv-
er's onscreen menu and a picture (valid signal) from the receiver should
it be switched to standard-definition mode.
You can also connect a 1080i or 480p video source that has component
video, RGB, or RGB+H/V oulput jacks rather than a DB 15 output jack
to the TV's HD INPUT-AV5. This type of hookup will require a special-
_y cable that has a DBI5 connector on one end and standard (phono-
_ype) RCA connectors on the other. See page 57 for more information
on HD INPUT-AV5 input compatibilily. Afler making the connections,
also ensure that the TV's color-space setting ma_ches the ouq_ut of your
video source, either RGB or YPbPr (see page 59).
The default color-space selting for the HD INPUT-AV 5 jack is RGB,
YPbPr is also an option, if the picture color looks grossly incorrect, try
changing either the receiver's or TV's color space, See the receiver's
directions-for-use manual for information on setting its color space. See
page 59 in this manual for information on selecting a color-space setting
for the AV5
input.
AV4 and AV5 do not function with the PIP feature, They cannot be dis-
played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.
15