Philips 55PP9352 Directions For Use Manual page 11

Connecting Accessory Devices to Your TV
C:mponent video inputs allow the highest pos-
ible color and picture resohttion in the play-
back of digital signals, such as those of DVD
players. 17re color dtfference signals (Pb, Pr) and
the luminance Or) signal are connected and
received separately. ITte result i_ better color
bandwidth inibrmation than is possible with com-
posite video (lubeled VIDEO on your TV_juck
panel) or S-Video connections.
]b make the connections show,n in this example,
you w,ill need:
• three cablesf!)r video connections (stundurd
RCA connectors)
• two cablesjbr audio connections (standard
RCA connectors).
NOTE: The cables are not supplied with your TI_
You should be able to buy them at most stores
that sell electronics. Or you cun call our
Customer Cure Center at 1-800-531-0039.
Connect the YPbPr (component)
VIDEO OUT jacks from the DVD player
to the INPUT-AV 1YPbPr (component
video) jacks on the rear of the TV.
NOTE: The INPUT-AV 1YPbPr jacks
will accept 480i (interlaced) output sig-
nals only. The connection exalnple on this
page assalnes the use ofa DVD player
with interlaced output. Some DVD play-
ers, howevel; have YPbPr outputs that can
be switched between interlaced and pro-
gessive scala.If you are attempting to use
a DVD player with progressive-scan
(480p output) capability to make the con-
nection shown in this exalnple, you must
be sure to switch the DVD player to inter-
laced. If necessary, refer to the DVD play-
er's directions-fol_use manual for help. if
you want to use the DVD player in pro-
_essive-scan mode, you must use the
HD INPUT-AV 4 jacks (see page 12).
Connect the AUDIO OUT L(eft) and R(ight) jacks from the DVD player to the
INPUT-AV 1AUDIO jacks on the rear of
the TV:
Press the AV button on the remote con- trol as many times as necessary to select
the CVI (component video input) source
on the TV.
Turn the DVD player on and press PLAY to view the DVD program on
the TV.
*(ExamNe:Philips DVD model DVD712)
[]
®
• To simplify making coanections, the connec-
tors on audio and video cables are often color
coded. The jacks on your TV are likewise
color coded to match the connectors.
• The names for the COlnponent v ideo jacks
may differ depending on the DVD player or
accessory digital soalve equipment used. For
exalnple, besides YPbPl; you may see
R-Y/B-Y/Y; or CrCbY Although abbrevia-
tions and terms may vaiN, the letters B and R
stand for the blue and led color componant
signal connectors, respectively, and Y indicates
the lalninance signal, ifnecessalT, refer to the
directions-for-use manual for yoar DVD or
digital accessory for more information.
• You can also connect a satellite receiver to the
TV in a manner similar to the exalnple shown
on this page. If you connect a satellite receiver
to the TV, you will need to use the receiver's
channeMnemorization system to store chan-
nels in the receiver's memory.
• If you experiance difficulties receiving soand
with a DVD disc, check the _)and settings
through the DVD disc's menu.
• The CVI source cannot be displayed in the
NP window. See page 7 in the Quick Use and
Setup GuMe for more on the PIP feature.
To prevent aneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 60.
11