Philips 55PP9352 Directions For Use Manual page 20

Using the Remote Control
y;ur TV remote can be set to work various
ccessory devices (VCRs, cable com,ert-
ers, and satellite receivers, ./or example) 1)y
what is called the Search Method,
NOTE: The Search Method works" only with
devices equipped with channel-display indi-
cators on the devices themseh,es or the abili-
ty to show channel numbers on the TV
screen, If the Code-entry Method (shown in
the previous section) did not enable your TV
remote to work your accessory device, then
fbllow the em T steps listed beloua Please
read the steps" once bejbre pe_jbrming them,
r-wff rm
'lurn on the desired device. Press
and hold down the VCR or ACC
(for an accessory device other than
a VCR) mode button on the TV
remote, Then press and hold down the
SURF button as you hold down the
desired mode (VCR or ACC) button,
NOTE: For correct operation, you
must press and hold down the desired
mode (VCR or ACC) button first and
then press and hold down the SURF
butlon second.
While holding down the SURF and
the desired mode (VCR or ACC)
buttons simultaneously, point the
remote toward the accessory device
and continue holding the buttons
down.
2
Watch the Channel Indicator on
your accessory device. Channel num-
bers will scan up when the TV remote
has identified the correct code for
your accessory device. This may take
several minutes,
3
Release the mode (VCR or ACC)
and SURF buttons as soon as chan-
nel numbers start to scan up. The
scanning means that your TV remole
has found the code for your accessory
device.
NOTE: If no channel change happens
after several minutes, repeat steps 1 and
2, Then if a channel change still does not
occur, the remole will not work wilh the
desired accessory device,
Satellite Receiver
Cable Converter Box
VCR
PHILIPS
2O
The remote's back light will blink
as the remote moves through its
product code list. Alter the remole
identifies the product code for
your accessory device and you
release the remole buttons, the
back light will blink twice.
Your TV remote may locate the
accessory device's code quickly or
within several minutes,
Don't let the accessory"device
scan up more than five channels
when the correct code is found
1heremote may pass up the right
code and have lo repeat lhe search
cycle,