Philips 55PP9352 Directions For Use Manual page 18

Using the Remote Control
y;ur TV remote is capable of working not
nly your TV but also other iq/?ared
remote (1R) controlled devices such as VCRs,
cable TV converter boxes, satellite receivers,
D VD players, and laser-disc players,
If you want to use your TV remote to oper-
ate a VCR or other accessory device, you
will need to perform this initial check
explained in this section. You may also need
to go W the sections on the "Code-entry
Method" and tile "Search Method" in tile
pages that fidlow.
Press the VCR or ACC(essory)
mode button on the TV remote for
the desired accessory device category.
NOTE: Pressing the VCR mode button
allows access to product codes for
VCRs, Pressing the ACC(essory) mode
button allows access to the product
codes for cable TV converters, satellite
receivers, DVD players, and laser-disc
players,
Point the TV remote toward the desired accessory device and press
the POWER button.
Does the remote turn the accessory
device on?
If yes, [_] and try other function but-
tons on the TV remote. With a VCR,
1
for example, try the Play, Stop, and
Rewind butlons, for example. (See
page 23 for information on how the
remote buttons correspond with acces-
sory device functions.) If they also
work the accessory device, then the
remote is ready and no further steps
are needed.
If not, do the following:
Look up a four-digit remote code
number on pages 21 or 22 for your
brand of accessory device. Then go
through the simple steps for entering a
four-digit code as explained on
page 19.
if more than one four-digit code number is
listed, you may have to try more than the
first number given to locate your device's
correct code,
18
Satellite Receiver
Cable Converter Box
DVD Player
VCR
®@@
@@@
®@@
6@®
PHILIPS