Philips 55PP9352 Directions For Use Manual page 58

Appendix B
Product Type
Rear-projection HDTV Monitor
Television System
NTSC standard
Channel Coverage
VHF: 2-13
UHF: 14-69
Cable TV: Midband
Superband
Hyperband
Ultraband
Power Source
AC 110 +10%,60 Hz
Power Consumption
255W (average),standby<1 W
Audio Power
2 x 10W, 50 Hz-10 kHz at 5%THD (fiat response),
8-ohm load
Speaker Type
4 x 6 oval, 15W
Video/Audio Terminals
IN PUT-AV 1
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
COMPONENT VIDEO INPUTS (YPbPr)
Y INPUT: 1.0Vp-p (includes sync), 75 ohms
Pb INPUT: 700mVp-p, 75 ohms
Pr INPUT: 700mVp-p, 75 ohms
(The Pb INPUT jack can also receive signalsfrom outputs
labeled Cb or B-'LThe Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.)
S-VIDEO INPUT (INPUT-AV 1, INPUT-AV2, side panel)
Y-INPUT: 1 Vp-p (includes sync), 75 ohms
C-INPUT: 300 mVp-p, 75 ohms
IN PUT-AV 2
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 4
ComponentVideoYPrPb/RGB (See page 57.)
AUDIO: 500 mVrms, 30 kohm
HD INPUT-AV 5
DB15 (See page 57.)
AUDIO: 500 mVrms, 30 kohm
VIDEO/AUDIO OUTPUT
VIDEO: 1Vpp, 75 ohms
AUDIO: Fixed: 500 mVrms into >10 kohm
Variable: 0-2Vrms into > 10 kohm
Side Panel (AV3)
VIDEO (composite): 1 Vp-p, 75 ohms
AUDIO: 500 mVrms, 30 kohm
HEADPHONE: 1.5 Vrms, 16 ohm
Picture Visible Area
55PP9352:1397 mm
(55in.)
60PP9352:1524 mm
(60 in.)
Dimensions
55PP9352:1337 mm (W) x 1449 mm (H) x 650 mm (D)
(52.6 in. x 57.0 in. x 25.6 in.)
60PP9352:1439 mm (W) x 1508 mm (H) x 683 mm (D)
(56.7 in. x 59.4 in. x 26.9 in.)
Weight (does not include carton)
55PP9352:85.28 kg (t88 Ib)
60PP9352:94.8 kg (209 Ib)
Supplied Accessories
Remote control with two size "AA" batteries.
Design and specifications are subject to change without notice.
58