Philips 55PP9352 Directions For Use Manual page 8

Connecting Accessory Devices toYourTV
Tjhe TV _ audio/video (A V) irlput jacks provide
r directpicture and sound connections
between the TV and accesso_ T devices such as
VCRs, D VD players, and others that have A V out-
putjack_.
"lhis example, which uses the INPUT-AV l jacks,
shows you one wuy you can connect a VCR to
your TE
R_@r to the directionszfbr-use manual jbr your
VCR fiJr fi_rther iqfiJtwzation on connections.
7b make the connections show,n it1tbis example,
you will need:
• one coaxial cubic (75f2)
• one cablejbr a vMeo connection (standard
RCA connector)
• two cablesjbr audio connections (standard
RCA connectors) (only one cubic is needed /br
a nonstereo VCR).
NOTE: "Hw cables are not supplied with your TE
You should be able to buy them at most stores
that sell electronics. Or you cun call our
Customer Cure Center at 1-800-531-0039
r-a-war
Connect a cable TV or antenna signal to
the ANT IN jack on the rear of the VCR.
2
3
Connect from the OUT jack on the rear
of the VCR to the ANTENNA IN 75D--
jack on the rear of the TVI
Connect the VIDEO OUT jack on the
rear of the VCR to the INPUT AV 1
VIDEO jack on the rear of the TVI
Connect the audio output R(ight) and L(eft) jacks on the rear of the VCR to the
INPUT-AV 1AUDIO jacks on the rear of
the TVI
NOTE: if the VCP, is a mono (nonstereo)
unit, connect only the left audio cable,
which usually has a white connector.
Press the AV button on the remote con- trol as many times as necessary to select
the AV1 source.
Turn the VCR on and press PLAY to view a videotape on the TV.
Rear of VCR*
* (Example: I_ilips VCR
mode[ VR674CAT)
[]
Rear of TV
®
I I
Coaxial CaNe
Lead-in from
Cable TV Company
or VI-IF]UHF Antenn_
To simplify making connections, audio and
video cables often have color-code connec-
tors. The jacks on your TV are likewise
color coded to match the connectors. The
coding is as follows:
• Yellow for video (composile)
• Red for the fight audio channel
• White for the left audio channel
NOTE: If your VCR is mono (non-
stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source io which
you've connecled the VCR (INPUT-AV 1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV's speakers.
See page 36.
You can display the AVI, AV2, orAV3 signal
sources in/he PIP window. See page 7 of the
Quick Use and Setup Guide for infom_alion on
using the Picture-in-Picture (PIP) feature.