Contact 7our l ocal DBS provider formore information
about the
connections
and theTV channels.
Connect
to a set-top
box
A cable box or satellite set-top
box can be connected
to theTV
through
the following
connections:
•
ANT
•
A/V (CompositeVideo
and Audio)
•
S-Video
•
YPbPr (ComponentVideo
Input)
•
HDNI
For information
about how to connect a set-top box, see the Quick
Start provided.
Connect
a set-top
box through RF IN/OUT
IftheTV
is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3 or 4, or to the channel
specified by the service providen
I
3
Connect the power cord plug to the power outlet. Ensure that the
cord is tightly secured at both ends.
©
o
Disconnect the TV from the power
Caution
•
Pull the power- cord b7 the plug; do not pull on the power- cord,
1
Unplug the power cord from the power outlet.
2
Unplug the power cord from the power connector at the bad< of
the TV.
i_ii
ii
!
Connect
a set-top
box through component
video input or HDMI
°
Connect the power cord
Warning
•
Verify that your power
voltage
corresponds
with the voltage
printed
at the back of the
TV. Do not insert
the power
cord
if the voltage is different.
1
Locate the power connector
at the back oftheTV.
The location of the power connector varies according toTV
model.
2
Insert the power cord fully into the power connector.
Manage cables
Route your power cord, antenna cable and all other cables through the
cable holder at the back oftheTV.The
holder helps keep your cables
tidy and easily manageable.
EN
9