Magnavox 47MF439B User Manual page 16

(Optional) Set daylight saving,
• Press Aand _ toenter themenu for[Daylight saving],
• Press AorTtohighlight [Automatic] or[Off].
• Press 4 toconfirm y our c hoice.
Press MENU t oexit.
Setthe time manually
1
Press MENU on the remote control and select [Installation] >
[Clock] > [Auto clock mode].
2 Select [Manual], and press 4 to confirm your choice.
TV menu I Installation
Clock Auto clock mode
Press T to select [Time] and then press I_ to set the time.
Use the format HH:PIPI. Select [AM]/[PM] for morning or
afternoon.
4
Press OK to confirm your choice.
5 Press T and _ to enterthe menu for [Day].
6 Press A or T to select the day.
7 Press OK to confirm your choice.
8 Press MENU to exit.
Set the sleeptimer
Sleeptimer switches theTV to standby after a pre-defi ned period of time.
You can always switch offyourTV earlier or reset the sleeptimer during
the countdown.
Press SLEEP repeatedly to select a value from 0 to 180 minutes. For
example, if you select 90,theTV switches to standby in 90 minutes.
• To turn the sleeptimer off, select 0 minutes,
Use child control and rating locks
You can prevent your children from watching certain programs or
certain channels by locking theTV controls and by using ratings.
3
• You are asked to enter your PIN again.
Enter your PIN again to confirm.
L_ A message appears to confirm that your PIN has been
changed.
4
Press MENU to exit.
Loci< the TV
This section describes how to loci< all channels on theTV. At the
specified time, screen is blanked out and the audio is muted.
1 Ensure that the clock is set with the current time (see 'Set the
clock' on page I5).
2 Press MENU on the remote control and select [Features] >
[Child lock] > [Lock after].
3 Enter your PIN (see 'Set or change your PIN' on page I6).
4
Press 1_to select [Timer].
Features IChild lock
Lock after Timer
Timer
8
9
10
5 Press T to select [On] and activate the [Lock after] feature. Select
[Off] to deactivate the feature.
6 Press _1to confirm your choice.
7 Press T to select [Time] and press I_ to set the time.
Use the format HH:PIPI, and select [AM]/[PM] for morning or
afternoon.
Press OK to confirm the time.
Press MENU to exit.
Turn theTV offand on again.
Lock a channel
This section describes how to loci< specified channels.The channels can
be selected but the screen is blanked out and the audio is muted.
1 Ensure that the clock is set with the current time (see 'Set the
clock' on page I5).
2 Press MENU on the remote control and select [Features] >
[Child lock] > [Channel lock].
3 Enter your PIN (see 'Set or change your PIN' on page I6).
Set or change your PIN
1
Press MENU on the remote control and select [Features] >
[Change PIN].
2
Enter a 4-digit PIN on the number keys of the remote control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN or if you have forgotten your PIN,
enter 07I I.
16 EN