Table of Contents
Advertisement
Slow Hotion
|
Press PAUSE during playback,
-)The
player will enter" PAUSE mode,
2
Use the 4/•
keys to enler the SLOW mode.
3
Use the _/•
keys to select the required
speed: •11/16, •11/8, •11/4 or•l
1/2 (backward), or
I• 1/1&1• 1/8,1• 1/4 orl•
1/2 (for'ward).
4
If PAUSE is pressed again, the speed will be set to zero
(PAUSE) and playback will pause,
5
To exit slow motion mode, press PLAY
Note:
-
Slowmotion playback in reverseis not applicable forVideo CD.
Still
Picture
and
Frame-by-frame
t M
I,
playback
|
Press PAUSE during playback,
I
2 _
-)The
p ayerw
now go nto PAUSE mode,
2
You can advance the picture frame by frame by pressing
PAUSE or" •
repeatedly on the remote control.
3
You can reverse the picture frame by frame by pressing •
repeatedly on the remote control.
4
Note:
-
Youcan not reverse the picture frame by frame forVideo CD.
•
Press and hold I_i_l or bgl<l repestedly to select the
required speed: 4<X2. _IX4. <<X16. <<X100 (backward)
or _-X2. _.,Xa. m._.X16. _ ._.X100 (lorward).
•
To exit SEARCH mode. press PLAY
•
With aVideo CD. the Search speed changes: <<X2. _I<Xa.
_IX8
(backward) or I_X2, H, X4, H, X8 (forward).
Repeat
iii
DVDVideo
Discs-
Repeat Chapter/
Title/Off
_ _
_ @000
j
•
To repeat the currentl 7 playing chaptec press
REPEAT,
-)'The Repeat
Chapter
icon appears on theTV
screen,
•
To repeat the title currently playing,press REPEATa second time,
-)The
RepeatTitle
icon appears on theTV screen,
•
To exit Repeat mode, press REPEAT a third time,
-)'The Repeat
Off icon appears on theTV screen.
Video CDs - RepeatTracldDisclAIIlOff
•
To repest the track currently playing, press REPEAT
-)The
Repeat Track
icon appears on theTV screen,
•
To repest the disc currently playing, press REPEAT a second
time.
-)The
Repeat
Disc icon appears on theTV screen,
•
To repest all discs (CD &Video CD without
PBC) in the
unit, press REPEAT a third Sine.
-)The
Repeat All icon appears on theTV screen.
•
To exit Repeat mode, press REPEAT a fourth time,
-)'The Repeat
Off icon appears on theTV screen.
Note:
-
On aVideo CD with PBC,you must set PBC to Off under
Personal Preference to use the Repeat functJon.See page 15.
18
OPERATION
Repeat A-B
To repeat a sequence in a title:
©©©G
|
PressA B at your chosen starting point.
_,_ _
4A
appears briefly on theTV screen,
8
:_:_j
*_
PressA B again at your chosen end point,
4 A-B appears briefly on theTV
screen, and the repeat
sequence begins(a-b repest appears on the player's display),
3
To cancel the sequence, press A B,
0:0,
Time
search
TheTime
Search function allows you to
start playing at any chosen time on the disc.
Press DISPLAY during playback.The on
screen display appears on the screen.
-'_ The Time Search box shows the elapsed
@@@
@@@
o@@
;_ii;_ _
;_
2
Within 10 seconds, press •/•
to select theTime
Search
icon in the on screen display4
-')The"
: : "appears in theTime Search box.
3
Within 10 seconds, use the numerical keys to enter" the
required start time. Enter hours, minutes and seconds from
left to right in the box.
-'_ If you enter the wrong numbers, press CLEAR to
remove the numbers you entered.Then
enter the correct
numbers.
4
Within 10 seconds, press OK to confirm the start time,
4
Playback starts from the selected time on the disc, If you
enter an invalid time, playback will continue from the
current point,
Note:
-
Time Search is not supported forVideo CD.
2
3
Zoom
The Zoom function allows you to enlarge
the video image and to move through the
enlarged image.
Press ZOOM
during playback or still
_'d)
playback to activate the Zoom function,
_'_
4 If you press ZOOM
repeatedly, the
o o o o
magnification level increases up to six times.
Use the • •
•
• keys to move through the zoomed
picture.
Press CLEAR to resume normal playback or return to the
paused image.
Video
Mode
Setting
With certain discs, the playback picture may be flickering or
Dot Crawl is shown on straight lines,That meansVertical
interpolation
or De interlace is not perfectly matched with
the disc, In this case, the picture quality may be improved by
changing the video mode,
1
To change the video mode, press and hold DISPLAY about
three seconds during disc playback.The new video mode
number selected is displayed on theTV screen. Check
whether the video quality has improved. If not, repe_t the
above procedure until picture quality is improved.
•
Video mode change sequence:
MODE1 --- MODE2 --_ MODE3 --_ MODE4 ---
MODES
•
If you turn offthe
power; the video mode will return to
initial state (MODE1).
Advertisement
Table of Contents
