Table of Contents
Advertisement
-
Country
Code
Enter the code ofia country/area
whose standards were
used to rate the DVD video disc, refierring to the list on
page 25.
|
To set the Country Code for the first time, press SYSTEM
MENU to display the DVD Player's Menu,
2
Select Countr 7 Code using the A/V keys,
3
While Country Code is selected, press I_.
4
Follow step 4 of"Rating"
on page 15,
5
Select the first character using the A/V keys,
6
Shift the cursor" using the _1/1_keys and select the second
7
Press OK to confirm your country code selection.
8
Press SYSTEM MENU to remove the menu.
Ifa Disc will not play
If you insert a disc that exceeds the rating level you set, you
maT see the message "Parental Control Limit," If so, press
PLAY bu|ton and the password input screen will appear
next press the numerical keys to enter TOUrfou_digit
password, then press the OK button,The disc will be
Or, you maT see this message if you insert a disc that
exceeds the rating level: "The parental setting of this player
prohibits pla_Would
you like to allow this disc to play?"
Press the 41/I_ buttons to select "Yes"or "No," then press
the OK button. If you select "No," a message will remind
you that the disc will not pla}4 Press the OPEN/CLOSE
button to remove the disc.
Or, if you select "Yes," next press the numerical keys to
enter" your four digit password, then press the OK button.
The disc will be available for playback as usual.
Notes'.
-
The messages will vary among discs.
- After you clear a message as described above, the disc will
play as usual However, if you turn off the DVD Player or open
the disc tray; you will repeat these steps again if you try to play
the same disc later.
-
Changing
the 4-digit
code
'1
Press SYSTEM MENU to display the DVD Player's Menu,
2
Select Rating using the A/V
keys,
3
While Rating is selected, press I_.
4
Enter the old code, then press OK.
5
Select Change using the A/V keys,
6
Press OK.
7
Enter'the new 4 digit code, then press OK.
8
Enter" exactly the same code a second time and verify by
pressing OK.
9
Press SYSTEM MENU to exit the menu.
-
If you forget your 4-digit code
If you forget your password, follow the procedure below to
'1
Press SYSTEM MENU to display the DVD Player's Menu,
2
Use the numeric keys to enter the 6 digit number
"210499,"
-_The 4 digit password is cleared,'P CLr" appears on the
displa)_The message will appear if-the disc tray is closed. It
will be on the display until you try another feature.
3
Enter a new code. See"R_ting" on page I5.
Parental
Control
Disclaimer
This DVD Player features the Parental Control system,
which is intended to be active when playing DVD discs with
certain software coding.This is according to technical
standards adopted by the set maker and disc content
industries,
Please note that Parental Control will not control a DVD
that does not have the appropnste
software coding.At the
time of release of this DVD Player, certain aspects of the
technical standards had not been settled between set
makers and the disc content industries,
For these reasons, Philips cannot guarantee the functioning
of Parental Control and denies any liability associated with
If in doubt, please make sure the disc plays according to
your Parental Control settings before you allow children
access to the DVD Player:
16
PREPARATION
Advertisement
Table of Contents
