Table of Contents
Advertisement
Operation
Loading
Discs
|
Press OPEN/CLOSE on the front of the player to open the
disc tray,
2
Load your chosen disc in the tray, with the label facing up,
When a double sided DVD is inserted, make sure the side
you want to play is facing up,
-_ Discs can be loaded one at a time by pressing DISC
SKIP to rotate the carousel,
3
Press OPEN/CLOSE again to close the tray.
-_ READING appears on theTV screen, and playback
starts automatically, In some cases, the disc menu might
appear instead,The disc that was in the front tray will be
selected For play,
Note:
- If'Parental Control'is set and the disc is not within the
"Rating'settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see "Parental
Control'on pages 15-16).
Exchanging
discs during
playback
•
Press EX CHANGE
on the front panel during playbad< to
open the disc tray,
•
PressDISC SKIPIo rota/e the disctrays Io the desired position.
The carouselwill move clockwise by one disc tray,
•
Exchangethe discsand press EX CHANGE or OPEN/CLOSE to
1
2
3
Note:
-
Thedisctray which wasin the play positioncan not be exchanged.
Skipping
discs
Press DISCSKIP duringplayor when playback isstopped.
Eachtime the button ispressed, the next disctray isselected.
Note:
-
When DISC SKIP is pressed, the disc trays rotate and play
begins from the beginning of the next disc.
-
If there is no disc on the next disc tray; the next disc tray
will be selected.
-
When DISC SKIP is pressed during playback of disc 5,
playback of disc I will start.
Exchanging
the disc and starting
playback
Press OPEN/CLOSE dudngplayback or whenplayback is stopped,
Playstops(if pressed duringplayback), the disctray opensandthe
disctraythat wasin the playpositioncomesto the t}ont.
Press OPEN/CLOSE or PLAY again,
Thetray closes andplayback begins(withthe discthat wasIn
Playing
DVD
and Video
CD
•
discs
and closing the tray,
V I D E O
_}
playback starts
automatically, depending on the disc,The player's display
shows the type of disc loaded, as well as the disc's
information and playing time,
•
The disc may invite you to select an item from a menu, I[
the selections are numbered, press the appropriate
numerical key; if not, use the A/V, _1/I,, keys to highlight
your selection, then press OK,
•
The number of the current tide and chapter show on the display,
•
Playback may stop st the end of theTitle, and you may
return to the disc menu.To go to the next title, press PLAY
•
To stop playbaclq press STOR
4 The default screen will appear:
4The
screen saver p_cture appears when you leave the
DVD Player _n stop mode for about five minutes,
-'_ After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off,
•
You can resume playback from the point st which you
stopped playback, If you see the Resume icon nil on the
screen when you stop playbadq press PLAY to resume
Notes:
-
DVDs may have a region code.
-
Your player will not play discsthat have a region code different
from your player.The region code for this player is 1 (one).
-
Do not touch the loading drawer and carousel while they
are in motion, and do not attempt to rotate the carousel by
hand; doing so could result in incorrect operation of the player
and/or damage to the discs.
General
Features
Note:
-
Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
DVD Player's menu.
Moving
to another
TITLE
When a disc has more than one title, you
can move to another title as follows:
Press DISPLAY when playback is stopped,
then press the appropriate
numerical key
(0 9) to select a title number:
iii!_iiii
_'® ® ®
_ililil
_ ® @ ®
ilii!i ® ® @
iiiii
Moving
to another
CHAPTER/TRACK
When a title on a disc has more than one
_ @ @
chapter or a disc has more than one track, you
@ @ @
@@@
can move to another" chaptefltrack as follows:
Press I_1_1 or" bgl_l briefly during playbad<
to select the next chaptedtr'acl< or" to return
to the beginning of the current chapter'/trad<
Press ]_t41 twice briefly to step bad< to the
To go directly to any, chapter during DVD playback, press
DISPLAY, Then, press A/V
to select C (chapter') (or for" a
Video CD, select T for track).Then, enter the chaptedtrack
number using the numerical keys (0 9).
Note:
-
For two-digit
numbers,
press the keys in rapid succession.
OPERATION
17
Advertisement
Table of Contents
