GE Profile 22 Installation And Owner's Manual page 24

Installation
Instructions
Refrigerator
Models 22, 23, 25, 26, 27 and 29
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
• IMPORTANT - Save these instructions
for local inspector's use.
• IMPORTANT - Observe all governing
codes and ordinances.
• Note to Installer - Be sure to leave these
instructions with the Consumer.
• Note to Consumer = Keep these instructions
for future reference.
• Skill level - Installation of this appliance requires
basic mechanical skills.
• Completion time - Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation is
not covered under the Warranty.
If the refrigerator has already been installed,
remove the base grille (see Step 2 in Moving
the Refrigerator), then skip to Step 5 in Installing
the Refrigerator.
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have
to be connected to a cold water line.
AGE
water
supply kit (containing tubing, shutoff valve, fittings
and instructions)is available at extra cost from your
dealer, by visiting our Website at ge.com (in Canada
at geappliances.ca) or from Parts and Accessories,
800.626.2002 (in Canada 1.888.261.]055).
TOOLS YOU WILL NEED
]/8" and 5/16" Socket
PhillipsHeadScrewdriver
1/2" and 7/16" Wrench
PlasticPutty Knife
24