GE Profile 22 Installation And Owner's Manual page 22

Inserting the door panels.
Read these instructions completely and carefully.
0 Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides If your model has a dispenser,this step only
into the slot behind the door handle. Pushthe filler applies to the fresh food panel and top freezer panel.
panel (required with some door panels)in behind
the decorator panel. Repeatfor fresh food panel.
0 Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot
behind the door handle. Pushthe filler panel (required
with some door panels)in behind the decorator panel.
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator door. Hand tighten only. Hake sure that the top of
compartment, each panel fits snugly behind the lip of the Top Trim.
With a T-20 Torxdriver,attach the Top Trim, using two
screws on each Top Trim piece, to the top of each
DTrim Screws
s Trim
Cut-Out
Side Trim---------_
Panel
/,
Panel
Fresh
Food
Panel
t
Side Trim
22