Table of Contents
Advertisement
4.
Use tools with the lowest vibration
when there is a choice between dif-
ferent processes.
5.
Include vibration-free periods each
day of work.
6.
Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7.
To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
SpEcIFIc SAFETY WARnIngS
Maintain labels and nameplates on
1.
the Tile Saw. These carry important
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
use the right product for the right
2.
job. There are certain applications
for which this product was designed.
Do not use small equipment, tools, or
attachments to do the work of larger
industrial equipment, tools, or attach-
ments. Do not use this product for a
purpose for which it was not intended.
This product must continuously
3.
run with cold water. Dry running will
cause serious damage to the Pump
seals.
WARnIng! Keeps hands and
4.
fingers away from cutting area and
Saw Blade.
check Blade guard for proper for-
5.
ward/backward movement before
each use. Do not operate the Tile
Saw if the Blade Guard does not
move freely. Make sure the Blade
Guard moves freely and does not
SKU 3733
For technical questions, please call 1-800-444-3353.
touch the Saw Blade or any other
part of the Saw, in all angles and
depths of cut.
do not handle the power Switch (4)
6.
with wet hands.
Make sure the Tile Saw is located
7.
on a flat, level, sturdy surface ca-
pable of supporting the weight of
the Saw and work pieces.
Always use diamond Saw Blades
8.
(67113 4" continuous Rim dia-
mond Blade not included, sold
separately) with a 4" diameter, 5/8"
round arbor hole, and rated at 4480
RpM or greater.
use the Tile Saw only for cutting
9.
dry or wet ceramic tile, quarry tile,
marble, terra-cotta, and slate with
a maximum thickness 1-1/16".
do not use the Tile Saw for cutting
10.
metals or for cutting curves. This
may cause the Saw Blade to break
and/or reduce its service life.
Make sure the Saw Blade is wet at
11.
all times when cutting.
12.
To reduce the risk of electrocution,
keep all connections dry and off
the ground. Do not touch plug with
wet hands. Ground Fault Circuit In-
terrupter (GFCI) protection should be
provided on the circuit(s) or outlet(s)
to be used for the tile saw (GFCI is
not included in this machinery). Re-
ceptacles are available having built-in
GFCI protection and may be used for
this measure of safety.
Page 5
Advertisement
Table of Contents
