Personal Safety; Tool Use And Care - Chicago Electric 94191 Assembly And Operation Instructions Manual

Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Provide barriers or shields as needed.
Stay alert. Watch what you are doing, and use common sense when operat-
1.
ing a power tool. do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
dress properly. do not wear loose clothing or jewelry. contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. be sure the Engine Ignition (2) is in its "Off" posi-
tion before moving the Generator and before performing any service, mainte-
nance, or cleaning procedures on the unit.
Remove adjusting keys or wrenches before turning the Generator on.
4.
wrench or a key that is left attached to a rotating part of the machine may result in
personal injury.
do not overreach. Keep proper footing and balance at all times.
5.
and balance enables better control of the power tool in unexpected situations.
use safety equipment. Always wear eye protection. Always wear
6.
ANSI approved safety impact goggles when using this product. ANSI
approved hearing protection must also be used.
do not force the tool. use the correct tool for your application.
1.
tool will do the job better and safer at the rate for which it is designed.
do not use the Generator if the Engine's Ignition (2) does not turn it on or off.
2.
Any tool that cannot be controlled with its power switch is dangerous and must be
replaced.
3. Store idle tools out of reach of children and other untrained persons.
are dangerous in the hands of untrained users.
Maintain tools with care.
4.
and are easier to control. Do not use a damaged tool. Tag damaged tools "do not
use" until repaired.
check for misalignment or binding of moving parts, breakage of parts, and any
5.
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
for technical questions, please call 1-800-444-3353.
SKU 94191

PERSONAl SAfETy

TOOl uSE ANd cARE

Properly maintained tools are less likely to malfunction
A
Proper footing
The correct
Tools
Page 3