Connecting To A Computer - Sanyo PLC-XU41 Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cable (HDB 15 pin) (Only a cable is supplied.)
• USB Cable ✽
• Audio Cables (Mini Plug: stereo)
✽
( = Not supplied with this projector.)
Monitor Input
VGA cable ✽
COMPUTER IN 2/ MONITOR OUT
✔
Note:
• If you wish to use Page e e d d buttons on the remote control, connect USB port of
your computer to the USB socket of the projector. (p9 and 42)
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
✽
Audio Output
USB port
VGA cable
Monitor Output
COMPUTER IN 1/ COMPONENT IN
(or COMPUTER IN 2/ MONITOR OUT)
COMPUTER IN 1
COMPUTER IN 1
DVI - I
/ COMPONENT IN
SERVICE PORT
SERVICE PORT
RESET RESET
COMPUTER IN 2 /
COMPUTER IN 2
COMPONENT IN /
MONITOR OUT
/
MONITOR OUT
This terminal is switcheable. Set up
the terminal as either Computer input
or Monitor output. (See Page 41.)
Audio cable (stereo) ✽
USB cable ✽
USB COMPUTER/ COMPONENT
AUDIO IN
AUDIO IN AUDIO IN
R L VIDEO VIDEO USB USB
R L (MONO) (MONO)
S-VIDEO
S-VIDEO
COMPUTER /
COMPUTER
/ COMPONENT COMPONENT
AUDIO IN
AUDIO IN
AUD
AUDIO OUT
ARIALE)
(VARIABLE)
AUDIO OUT
(stereo)
Installation
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)
15