How To Operate The On-Screen Menu - Sanyo PLC-XU41 Owner's Manual

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
1 Press the MENU button to display the On-Screen Menu.
2
Press the Point 7 8 buttons to select a Menu icon to adjust.
Press the Point ed buttons to select an item to adjust.
3
Press the SELECT button to show the item data. Press the
Point 7 8 buttons to adjust the data. Refer to the following
pages for respective adjustment.
✔
Note:
The selected item is not in effective until the SELECT button is pressed.
20
On-Screen Menu
Menu bar
Pointer (red frame)
d
Press the Point button to
move the pointer.
Item
SELECT
button
Item data
Press the Point
to adjust value.
Quit to exit this menu.
ON - OFF
COMPUTER VIDEO
Remote Control
VOLUME - VOLUME +
MENU SELECT
D.ZOOM PAGE KEYSTONE NO SHOW
P - TIMER
AUTO PC
IMAGE FREEZE MUTE
Top Control
ON - OFF
POWER
INPUT
WARNING
KEYSTONE
LAMP
REPLACE
SELECT
MENU
Menu icon
Pointer
(red frame)
7 8
buttons
POINT buttons
MENU button
SELECT button
POINT button
(outer ring)
SELECT button
MENU button