Sanyo PLC-XU41 Owner's Manual page 42

Setting
Lamp mode
This function allows you to change brightness of the screen.
···· normal brightness
···· the controlled brightness according with input signal
···· lower brightness reduces the lamp power consumption
and extends the lamp life
✔
Note:
Lamp mode is not switched into Eco mode (
is turned on.
Remote control
This projector provides two different remote control codes; the
factory-set, initial code (Code 1) and the secondary code (Code 2).
This switching function prevents remote control interference
when operating several projectors or video equipment at the same
time.
When operating the projector in "Code 2", both the projector and
the remote control must be switched to "Code 2".
To change the code for the projector;
Select either "Code 1" or "Code 2" in this Setting Menu.
To change the code for the remote control;
Press and hold both the MENU and IMAGE buttons together for
10 seconds or more. After changing the code, make sure the
remote control operates properly.
USB
This projector is equipped with the USB port for interactive
operation between the projector and computer. Selects either of
the followings as needed.
···· When using the PAGE
control unit. (p11)
···· When controlling the projector with a computer.
This item is provided for future use. Not available now.
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by an unauthorized person.
···· not locked.
···· locks operation of the top control. To unlock, use the
remote control.
···· locks operation of the remote control. To unlock, use
the top control.
If the top control accidentally becomes locked and you do not have
the remote control nearby, disconnect the AC power cord from
the AC outlet, and then while pressing the SELECT button,
reinsert the AC power cord. This will release the top control lock.
42
) within 2 minutes after the projector
ed buttons on the remote
Remote control
ON - OFF
COMPUTER VIDEO
VOLUME - VOLUME +
MENU SELECT
D.ZOOM PAGE KEYSTONE NO SHOW
P - TIMER
AUTO PC
IMAGE FREEZE MUTE
Key lock
Select Key lock and
this box appears.
Choose one of
these with the
Point e e d d button
and select [Yes] to
activate it.
Press and hold
MENU and IMAGE
buttons for 10
seconds or more.