Image Level Adjustment - Sanyo PLC-XU41 Owner's Manual

Computer Input

Image Level Adjustment

1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Image Adjust Menu icon.
2 Press the Point
the item that you want to adjust, and then press the SELECT
button. The level of each item is displayed. Adjust each
level by pressing the Point
Contrast
Press the Point 7 button to decrease contrast and the Point
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust image darker and the Point
button to adjust image brighter. (From 0 to 63.)
Color temp.
Press the Point 7 button or the Point
level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point
7
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the Point button to lighten green tone and the Point
7
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten blue tone and the Point
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point 7 button to soften the image and the Point
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8
(From 0 to 15.)
Reset
Resets all adjustment to their previous levels.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SELECT button. The
Image Level Menu will appear. Move the red frame pointer to the
Image 1 to 4 where you want to set and then press the SELECT
button.
Quit
Closes the Image Adjust Menu.
30
7 8 button to move the red frame
d d button to move the red frame pointer to
7 8 button.
8 button for Color temp.
button to lighten red tone and the Point
button to obtain better balance of contrast.
Image Adjust Menu
8
8
8
8
8
8
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SELECT button.
Selected Image level
Press the Point 7 8 button to
adjust value.
Store icon
Press the SELECT button at
this icon to store the
adjustment.
Image Level Menu
Move the red frame pointer to
any of Image 1 to 4 where you
want to set and then press
the SELECT button.