Exposure Correction - Sanyo VPC-CG6 Instruction Manual

EXPOSURE CORRECTION

By assigning the exposure correction operation shortcut to the SET button
(page 132), you can make the image lighter or darker when capturing images.
1
Assign the operation shortcut
to the SET button (page 132).
2
Toggle the SET button in the
direction for which the
operation shortcut was
assigned.
h The exposure correction bar
appears.
3
Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to a
value from –1.8 EV to
+1.8 EV.
h The exposure correction bar
is canceled when the MENU
button or the SET button is
pressed.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the camera is set to the playback mode.
i After the power is turned off.
SET button
12
Pointer
Exposure correction bar
00:00:15
58
English