Sanyo VPC-CG6 Instruction Manual page 85

SETTING THE FLASH MODE
3
Select the desired icon from the flash menu, and press the SET
button.
h The selected flash mode is set.
4
Take the picture.
h Still image shooting
CAUTION
Do not touch the flash unit when shooting.
i The flash unit becomes very hot and may cause a burn. Avoid touching the
flash unit when shooting.
HINT
i The flash cannot be used during video clip recording.
i By assigning an operation shortcut to the SET button (page 132), you can
change the flash mode from the Shooting Screen.
71
English
→
page 45