Exposure Correction - Sanyo Xacti VPC-C4 Instruction Manual

Exposure correction

When capturing images, you can make the image lighter or darker.
1
Set the main switch to REC.
h To exit the Shooting Setting Screen,
press the MENU button.
2
With the Shooting Setting Screen
not shown, toggle the SET button to
the left or right.
h The exposure correction bar
appears.
3
Toggle the SET button to the left or
right to adjust the exposure.
h To cancel the exposure correction
bar, press the MENU button.
h The exposure setting numerical
value is shown at the left end of the
exposure bar. The exposure can be
set to a value from –1.8EV to
+1.8EV.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i After a Playback or Option Screen is accessed.
i When the main switch is set to PLAY.
i After the power is turned off.
MENU button
Main switch
12
English
SET button
00:00:15
52