Exposure Correction - Sanyo Xacti VPC-C1EX Instruction Manual

EXPOSURE CORRECTION

When capturing images, you can make the image lighter or darker.
1
Set the main switch to REC, and set
the camera to the EXPERT
shooting mode (page 78).
e To exit the EXPERT Mode
Shooting Setting Screen, press the
MENU button.
2
When the EXPERT Mode Shooting
Setting Screen is not shown, toggle
the SET button to the left or right.
e The exposure correction bar
appears.
3
Toggle the SET button to the left or
right to adjust the exposure.
e To cancel the exposure correction
bar, press the MENU button.
e The exposure setting numerical
value is shown at the left end of the
exposure bar. The exposure can
be set to a value from –1.8EV to
+1.8EV.
HINT
The exposure correction setting is canceled in the following
cases:
e When the pointer is set to the center position.
e After the menu mode is changed.
e When the main switch is set to [PLAY].
e After the power is turned off.
MENU button
Main switch
SET button
4 00:11
0
English
86