Sanyo VPC-CG6 Instruction Manual page 178

Why does a
message appear
Printing
during PictBridge
printing?
The "Cannot edit
video" message
appears.
Why is a noise
heard from a
nearby TV or
radio during
battery
recharging?
Why does the
"Card full" or
"Internal memory
full" message
appear?
Misc.
Why does the
"Card is
protected"
message appear?
Why can't the
camera be
operated?
A problem such
as inability to
record or play
back occurs.
Question
There is a
problem with the
printer.
You have
attempted to join
video clips that
were recorded in
different modes.
Electromagnetic
waves are emitted
from the battery
charger.
There is no more
available memory
on the card or in
the camera's
internal memory.
The lock switch on
the card is in the
locked (protect)
position.
A temporary
internal circuitry
problem may be
the cause.
The card contains
files that were
saved using a
device other than
this camera.
Answer
Please refer to the
instruction manual
for your printer.
Select video clips
that were recorded
in the same mode.
Move the battery
charger further away
from the TV or radio
when recharging the
battery pack.
Erase unnecessary
data, or use a card
that has more
memory available.
Move the lock switch
to the unlocked
position.
Remove the battery
pack from the
camera, wait a few
minutes, then
reinstall the battery
pack and try again.
After saving your
files to a different
medium, format the
card.
Action
164
English