GE Appliances PHS925ST2SS Owner's Manual page 6

Using the surface units,
How Induction Surface Cooking Works
Induction coils under the glass cooking surface produce
a magnetic field that generates heat in ferrous metals
that are in close proximity. The glass cooking surface is
not heated directly since it is not a ferrous metal, but the
glass may eventually become hot from the pan. Induction
surface coils are more efficient and will heat much faster
than conventional electric and gas cooking surface cooking
products.
CAUTION:
. The induction cooking elements may appear to be cool while
turned ON and after they have been turned OFF.The glass
surface may be HOTfrom residual heat transferredfrom the
cookware and burns may occur.
. DO NOTTOUCHHOTCOOKWARE or PANSdirectly with hands.
Always use mitts or pot holders to protect hands from burns.
. DO NOTSLIDEcookware across the cooktop surface. Doing
so may permanently damage the appearance of the ceramic
cooktop.
[A WARNING
i IRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings. Keep flammable items away from the cooktop. Turn off all controls when
done cooking. Failure to follow these instructions can result in fire, serious injury or
death.
Throughout this manual, features and appearance may vary from your model.
The power level with a fraction
indicates the additional
half-step setting. You may
hear clicking sounds indicating
the control is maintaining your
desired setting.
Surface Unit Cook Settings
The cooktop offers !9 power levels.Power
levels range from LOto HI in precise half-step
increments. For example: LO,1, 1-1/2, 2,2-1/2
and up to H.
Power Level"L", the lowest setting, is
recommended for "KeepWarm."
The power level increases one-half level with
each touch.
Single Surface Unit--Cook Settings
To turn on e single surface unit:
[] Touch the ON/OFF pad; then touch the
(+1/(-1 pad.
[] Use the (+)/10pad to choose the desired
power setting.
r_ To turn off a single surface unit, touch the
ON/OFF pad again.
To use the Melt feature:
Touch the ON/OFF pad; then touch MELT.
The element will automatically set to a
predetermined setting.
To use the Simmer feature:
Touch the ON/OFF pad; then touch SIMMER.
The element will automatically set to a
predetermined setting. Adjust using the (+)/(-)
pad to increase or decrease the simmer rate.