GE Appliances 25 Owner's Manual & Installation Instructions page 15

Replacing the light bulbs.
Turning the control to the 0 (off) position does not remove power to the light circuit.
Refrigerator Lights (onsom_, mode.is)
Ik CAUTION: LU, b.,bsm y
be hot.
O Unplug the refrigerator.
O To remove the light shield, grasp the
shield at the back and pull out to release
the tabs at the back.
Rotate the shield down and then forward
to releasethe tubs at the front of the
shield.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
NOTE'Appliance bulbs may be ordered from
GE Parts and Accessories,800.626.2002.
LED Lighting - Module (on some models)
LED Lighting - Individual (on some models)
LEDlighting will need to be replaced by an
authorized technician.
Call !.800.432.2737 in the United States. In
Canada, call 1.800.561.3344
Light
Shield
Appearance may vary
Freezer Light (on some models)
ik CAUTION:
be hot.
Unplug the refrigerator.
Removethe freezer basket for access.
The bulb is located at the rear of the
freezer inside a light shield.
O To remove, grasp the shield at the top
and pull out to releasethe tabs at the
bottom.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield and freezer basket.
O Plugthe refrigerator back in.
15