Table of Contents
Advertisement
Sync
Select Signal from the "Setup" menu during RGB input signal.
1
2
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input
signal).
Auto: The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.
Refresh Rate
This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen fl icker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
1
2
H-Freq. (kHz) / V-Freq. (Hz)
Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
Press to adjust.
Press to exit from adjust mode.
(for TH-37PR10M, TH-42PR10M, TH-37PR10A, TH-42PR10A)
Press to select Refresh Rate.
Press to adjust.
Press to exit from adjust
mode.
Setup for Input Signals
[ AV ]
Signal
3D Y/C Filter (NTSC)
Colour system
Auto
Cinema reality
Off
Panasonic Auto (4 : 3)
4 : 3
P-NR
Off
Refresh Rate
100 Hz
[ Component ]
Signal
Cinema reality
Off
P-NR
Off
100 Hz
Refresh Rate
Setup
Signal
Component/RGB-in select
RGB
PC
Input label
Power save
Off
Standby save
Off
Power management
Off
Auto power off
Off
English ( UK )
OSD Language
Press ACTION ( ) button
[ RGB ]
Signal
Sync
Auto
Cinema reality
Off
P-NR
Off
H-Freq.
33.8
kHz
V-Freq.
60.0
Hz
Sync
Auto
Sync
on G
Sync
VBS
[ RGB ]
Signal
Sync
Auto
Cinema reality
Off
P-NR
Off
Refresh Rate
100 Hz
H-Freq.
33.8
kHz
V-Freq.
60.0
Hz
[ Digital ]
Signal
Cinema reality
Off
P-NR
Off
Refresh Rate
100 Hz
H-Freq.
33.8
kHz
V-Freq.
60.0
Hz
H-Freq.
33.8
kHz
V-Freq.
60.0
Hz
1/2
35
Advertisement
Table of Contents
