Step 3 Set Up To Match Your Tv And Remote Control; When Other Panasonic Products Respond To This Remote Control; Selecting The Television Type; Television Operation - Panasonic Diga DMR-ES35V Operating Instructions Manual

STEP 3 Set up to match your TV and remote control

When other Panasonic products respond to
this remote control
If you place other Panasonic products close together, change the remote
control code on the main unit and on the remote control (the two must
match). When changing the remote control code, make sure the two codes
are the same.
Use "DVD 1", the factory set code, under normal circumstances.
[1]
While stopped
Press [FUNCTIONS].
Press [3, 4] to select
[2]
"To Others" and then press
[ENTER].
[3]
[For]Australia]and]New]Zealand]
Press [3, 4] to select
"Setup" and then press
[ENTER].
[For]Asia]and]the]Middle]East]
Check that "Setup" is selected and then press
[ENTER].
≥If a disc is inserted and "Setup" is not selected, press [3, 4] to
select "Setup" and then press [ENTER].
[4] Press [3, 4] to select "Others" and then press
[2, 1].
Press [3, 4] to select "Remote Control" and then
[5]
press [ENTER].
[6] Press [3, 4] to select the code ("DVD 1", "DVD 2"
or "DVD 3") and then press [ENTER].
≥The code on the unit has been set.
[7]
While pressing [ENTER], press and hold for about 2
seconds the numbered button ([1], [2] or [3])
corresponding to the code you selected in step 6.
≥The code on the remote control has been set.
[8]
Press [ENTER].
∫ When the following indicator appears on the unit's display
The unit's remote control code
Change the code on the remote control to match the main unit's code
(l step 7).
∫ To return to the previous screen
Press [RETURN].
FUNCTIONS No Disc
No Disc
Recording
Copy
To Others
ENTER
RETURN

Selecting the television type

Choose the setting to suit your television and preference.
[1]
While stopped
Press [FUNCTIONS].
Press [3, 4] to select "To
[2]
Others" and then press
[ENTER].
[3]
[For]Australia]and]New]Zealand]
Press [3, 4] to select
"Setup" and then press
[ENTER].
[For]Asia]and]the]Middle]East]
Check that "Setup" is selected and then press
[ENTER].
≥If a disc is inserted and "Setup" is not selected, press [3, 4] to
select "Setup" and then press [ENTER].
[4] Press [3, 4] to select "Connection" and then press
[2, 1].
[5] Press [3, 4] to select "TV Aspect" and then press
[ENTER].
Press [3, 4] to select the TV aspect and then press
[6]
[ENTER].
≥16:9:
16:9 widescreen television
≥4:3:
4:3 aspect television
[RAM] Titles are recorded as they appear on the screen.
[DVD-V] Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc) (l 62).
≥Letterbox: 4:3 aspect television
Widescreen picture is shown in the letterbox style (l 62).

Television operation

Set the remote control as follows to turn the TV On/Off, change the TV
input mode, select the TV channel and change the TV volume by means of
this remote control.
Point the remote control at the TV
While pressing [Í, TV], enter the code using the
numbered buttons.
e.g., 02: press [0] > [2].
Manufacturer and Code No.
Brand
Panasonic/National
GOLDSTAR/LG
HITACHI
JVC
MITSUBISHI
NEC
PHILIPS
SAMSUNG
SANYO
SHARP
SONY
TOSHIBA
≥Test by turning on the TV and changing channels. Repeat the procedure
until you find the code that allows correct operation.
≥This remote control is not compatible with your TV if your TV brand is not
listed or if the code listed for your TV does not allow control of your TV.
∫ To exit the screen
Press [RETURN] several times.
FUNCTIONS No Disc
No Disc
Recording
Copy
To Others
ENTER
RETURN
TV Aspect
Setup
16:9 WIDE TV
16:9
Tuning
4:3 TV
Disc
Picture
4:3
Sound
Letterbox
Display
Connection
SELECT
VHS
ENTER
Others
RETURN
Code
01/02/03/04
15/16
08
07
09/10
13
12
17/18
14/19
11
05
06
15
RQTV0136