Resetting The Channel Setting; Tuning; Manual; To Change Detailed Station Settings - Panasonic Diga DMR-ES35V Operating Instructions Manual

Resetting the channel setting

Numbered
buttons
3, 4, 2, 1
ENTER
A
B

Tuning

[1]
While stopped
Press [FUNCTIONS].
[2] Press [3, 4] to select "To Others" and then press
[ENTER].
[3] Press [3, 4] to select "Setup" and then press
[ENTER].
Press [3, 4] to select "Tuning" and then press
[4]
[2, 1].

∫ Manual

You can add or delete channels or the change programme positions.
[5] Press [3, 4] to select "Manual" and then press
[ENTER].
To delete a programme position
Press [2, 1, 3, 4] to select a programme position and then press
[A].
To add a blank programme position
Press [2, 1, 3, 4] to select a programme position and then press
[B].
To move a TV station to another programme position
1 Press [2, 1, 3, 4] to select the programme position and then
press [C].
2 Press [3, 4] to select the new programme position to which you
want to assign the TV station and then press [ENTER].
60
RQTV0136
1 2 3
4 5 6
7 8 9
0
ENTER
FUNCTIONS
RETURN
RETURN
C
A B

∫ To change detailed station settings

Follow steps 1 to 5, l left.
[6] Press [2, 1, 3, 4] to select a programme position
and then press [ENTER].
Press [3, 4] to select an item and then press [1].
Pos To change the programme position in which the TV
stations are assigned
Press [3, 4] or the numbered buttons to select the
number of the desired programme position and then
press [ENTER].
Name To enter or change the name of a TV station
Press [3, 4] to enter the station name and then press
[ENTER].
If the station name needs a blank space, select the blank
between "Z" and "£".
Channel To enter newly available TV stations or change the
channel number of an already tuned TV station
Press [3, 4] or the numbered buttons to enter the
channel number of the desired TV station. Wait a few
moments until the desired TV station has been tuned.
After the desired TV station is tuned, press [ENTER].
Fine To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition and
Tuning
then press [ENTER].
Press [1] to return to "Auto".
Video To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if the picture
¢
System
lacks colour and then press [ENTER].
Auto: This unit automatically distinguishes PAL
and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
≥This setting is also available when you select the
external input channel (AV1, AV2 or DV IN) in step 5.
In order to record properly make sure the appropriate
setting to match the connected equipment.
Audio To select the audio reception type
¢ Press [3, 4] to select the items and then press
Mode
[ENTER], if the sound quality is poor.
BG: PAL B.G
I: PAL I
DK: PAL D.K.K1
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" and then press [ENTER], if
the stereo sound is distorted due to inferior reception
conditions or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM broadcast.
¢ [For]the]Middle]East]
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].