1.4.4
Answering Call Waiting
–
Answering Call Waiting in the PBX
–
Answering Call Waiting from the Telephone Company
Answering Call Waiting in the PBX
During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs
when an outside call has been received or another extension is letting you know a call is waiting. You must
activate this feature to use it. (Default: Disable—No call [Intercom calls]/No tone [Outside calls])
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
PT/SLT/PS
While hearing a tone
On-hook.
2. To hold the current call and then talk to the new party
PT/PS
While hearing a tone
HOLD
Press HOLD .
SLT
While hearing a tone
Press Recall/hookswitch .
Talk to the
Off-hook.
new party.
(CO)
OR
INTERCOM
Press CO or
INTERCOM .
Disregard this step if both
parties are extensions.
5
0
50.
Enter
Talk to the
new party.
C.Tone
Talk to the
new party.
1.4 During a Conversation
User Manual
65