Grizzly GO739 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Sander
  5. GO739
  6. Owner's manual

Grizzly GO739 Owner's Manual

Oscillating spindle sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL G0739
OSCILLATING SPINDLE SANDER
OWNER'S MANuAL
(For models manufactured since 2/12)
Copyright © FEBrUAry, 2012 By grizzly indUstriAl, inC.
WARNING: NO PORTION Of ThIS MANuAL MAy bE REPRODuCED IN ANy ShAPE
OR fORM WIThOuT ThE WRITTEN APPROvAL Of GRIzzLy INDuSTRIAL, INC.
#stBl14792 printEd in ChinA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GO739 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly GO739

Summary of Contents for Grizzly GO739

  • Page 1 OWNER'S MANuAL (For models manufactured since 2/12) Copyright © FEBrUAry, 2012 By grizzly indUstriAl, inC. WARNING: NO PORTION Of ThIS MANuAL MAy bE REPRODuCED IN ANy ShAPE OR fORM WIThOuT ThE WRITTEN APPROvAL Of GRIzzLy INDuSTRIAL, INC. #stBl14792 printEd in ChinA...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    Table of Contents INTRODuCTION ..........2 SECTION 4: OPERATIONS ......16 Manual Accuracy ........... 2 disabling switch........... 16 Contact info............ 2 sanding drum/sleeve installation ....17 identification ........... 3 sanding ............17 SECTION 1: SAfETy ........5 SECTION 5: ACCESSORIES ......18 safety instructions for Machinery ....

  • Page 4: Introduction

    Your Machine For your convenience, we post all available man- uals and manual updates for free on our website at www.grizzly.com. Any updates to your model of machine will be reflected in these documents as soon as they are complete.

  • Page 5: Identification

    Identification spindle spindle hex nut table insert spindle Washer drum and sanding sleeve table sander Body dust port drums and sanding sleeves power Cord table inserts spindle Washers (not shown) on/oFF paddle switch w/disabling Key figure 1. Machine identification. for your Own Safety Read This Manual before Operating Spindle Sander a) Wear eye protection.

  • Page 6: Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0739 OSCILLATING SPINDLE SANDER Product Dimensions: Weight................................30 lbs. Width (side-to-side) x Depth (front-to-back) x Height..........15-9/16 in. x 14-1/8 in. x 17 in. Footprint (Length x Width)........................

  • Page 7: Section 1: Safety

    SECTION 1: SAfETy For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages.
  • Page 8 ­ ­ DISCONNECTING POWER SUPPLY.­Always­dis- GUARDS & COVERS.­ Guards­ and­ covers­ can­ connect­ machine­ from­ power­ supply­ before­ ser- protect­ you­ from­ accidental­ contact­ with­ moving­ vicing,­ adjusting,­ or­ changing­ cutting­ tools­ (bits,­ parts­ or­ flying­ debris.­ Make­ sure­ they­ are­ prop- blades,­...

  • Page 9: Additional Safety For Spindle Sanders

    Additional Safety for Spindle Sanders fEED RATE. never jam a workpiece against the DuST COLLECTION. never operate the sander sanding surface. this can cause the workpiece to without an adequate dust collection system in kick back or damage the machine. Firmly hold the place and running.

  • Page 10: Section 2: Power Supply

    SECTION 2: POWER SuPPLy Availability Circuit Requirements Before installing the machine, consider the avail- This machine is prewired to operate on a 120V ability and proximity of the required power supply power supply circuit that has a verified ground and circuit.

  • Page 11: Polarized Plug

    Extension Cords Polarized Plug We do not recommend using an extension cord to reduce the risk of electric shock, this machine with this machine. If you must use an extension has a polarized plug (one blade is wider than the cord, only use it if absolutely necessary and only other).

  • Page 12: Section 3: Setup

    SECTION 3: SETuP unpacking This machine presents serious injury hazards Your machine was carefully packaged for safe to untrained users. Read transportation. Remove the packaging materials through this entire manu- from around your machine and inspect it. If you al to become familiar with discover any damage, please call us immediately the controls and opera- at (570) 546-9663 for advice.

  • Page 13: Inventory

    Inventory Cleanup The following is a description of the main compo- The unpainted surfaces of your machine are nents shipped with your machine. Lay the compo- coated with a heavy-duty rust preventative that nents out to inventory them. prevents corrosion during shipment and storage. This rust preventative works extremely well, but it If any non-proprietary parts are missing (e.g.

  • Page 14: Site Considerations

    Site Considerations Weight Load Physical Environment Refer to the Machine Data Sheet for the weight The physical environment where the machine is of your machine. Make sure that the surface upon operated is important for safe operation and lon- which the machine is placed will bear the weight gevity of machine components.

  • Page 15: Mounting

    Mounting Assembly The base of this machine has mounting holes place the spindle hex nut, table inserts, sand- that allow it to be fastened to a workbench or ing drums and sleeves, and spindle washers in other mounting surface to prevent it from moving the appropriate sized accessory slots beneath during operation and causing accidental injury or the table.

  • Page 16: Dust Collection

    Dust Collection Power Connection After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply. DO NOT operate the Model G0739 without an adequate dust collection system. This sand- To avoid unexpected startups or property dam- er creates substantial amounts of wood dust age, use the following steps whenever connecting...

  • Page 17: Test Run

    where children may be present. IMPORTANT: Disabling the switch only restricts its function. It is not a substitute Test Run for disconnecting machine from power when remove the switch disabling key, as shown adjusting or servicing. in figure 11. once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation.

  • Page 18: Section 4: Operations

    12. disabling switch by removing key. training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training. Children or untrained people can be seriously injured by this machine. This risk increases with unsupervised operation.

  • Page 19: Sanding Drum/Sleeve Installation

    Sanding Drum/ Clean the table opening for the table insert and any other spindle areas as necessary. Sleeve Installation there should be no sawdust on the ledge of the table opening where the table insert is placed or the table insert will not sit flush with to ensure the workpiece is supported during sand- the table.

  • Page 20: Section 5: Accessories

    Grizzly. a range of diameters and grits to meet all of your sanding needs. NOTICE Refer to the newest copy of the Grizzly Catalog for other accessories available for this machine. PRO-STIK belt Cleaners ®...

  • Page 21: Section 6: Maintenance

    SECTION 6: MAINTENANCE Cleaning Always disconnect power to the machine before to clean your machine, vacuum excess wood performing maintenance. chips and sawdust, and wipe off any remaining failure to do this may dust with a dry cloth. sawdust and other particles result in serious person- can also work their way under the table insert, al injury.

  • Page 22: Section 7: Service

    SECTION 7: SERvICE Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufacture date of your machine before calling. Troubleshooting symptom possible Cause...

  • Page 23: Changing Motor Brushes

    Motor Brushes A pair of new brushes can be purchased from grizzly by requesting part #p0739033A. the replacement procedure can usually be done in about 15 minutes. When replacing the brushes, we recommend replacing them one at a time so you can keep track of which wire connects to each brush.

  • Page 24: Section 8: Wiring

    Technical source. Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -22- Model g0739 (Mfg. since 2/12)

  • Page 25: Wiring Diagram

    Wiring Diagram G0739 Wiring Diagram Motor 120V PADDLE SWITCH (Viewed from Behind) 120 VAC 1-15 Plug Single-Phase Silicon Bridge Rectifier KBPC1504 READ ELECTRICAL SAFETY -23- Model g0739 (Mfg. since 2/12) ON PAGE 24!

  • Page 26: Section 9: Parts

    SECTION 9: PARTS Main breakdown 2 (2-1, 2-2, 2-3) 3 (3-1, 3-2, 3-3, 3-4, 3-5, 3-6) 4 (4-1, 4-2, 4-3, 4-4, 4-5) 5 (5-1, 5-2, 5-3, 5-4, 5-5, 5-6) -24- Model g0739 (Mfg. since 2/12)
  • Page 27 Main Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION P0739001 SPINDLE HEX NUT M10-1.5 P0739036 CORD CLAMP P0739002 SPINDLE WASHER SET OF 4 PTLW11M INT TOOTH WASHER 4MM P0739002-1 SPINDLE WASHER 5/8" OD PHTEK31M TAP SCREW M4 X 14 P0739002-2 SPINDLE WASHER 7/8"...

  • Page 28: Labels Breakdown

    Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
  • Page 29 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 30 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 31: Warranty & Returns

    WARRANTy & RETuRNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
  • Page 32 Buy Direct and Save with Grizzly – Trusted, Proven and a Great Value! ® ~Since 1983~ Visit Our Website Today For Current Specials! ORDER 24 HOURS A DAY! 1-800-523-4777...

Table of Contents