Marantz DR2100 User Manual page 17

SYSTEM RECORDING (FROM EXTERNAL SOURCE)
The numbers between parentheses refer to the fold-out.
PHONES TUNER MODE TUNER
STANDBY
POWER
SOURCE REC TYPE REC STOP PLAY/PAUSE
ON
OFF
er y u
System connection recording
DR2100 is also able to make the external recording by combi-
nation of Marantz products such as SR2100 or DV2100 using
system connection.
q q q q q
Make sure the disc is absolutely free of scratches and
dust particles.
w w w w w
Connect the cables as the system connection(See page 6)
➔ Set the remote control selector to SYSTEM for both
DR2100 and SR2100
e e e e e
Press SOURCE (2, 55) repeatedly until
the display
r r r r r
When the recorder stopped, press REC TYPE (3, 54)
five times to enter the Manual Record standby mode.
➔ the display shows
ANA
L
CD - R W
R
MAX POSITION
t t t t t
Set the optimal recording level on the CD-Recorder.
q Play the source first to set the optimal recording level on
the CD-Recorder.
w Rotate the MULTI JOG (21) to adjust the recording level.
The maximum position of the level could be reaching the
dotted line on the picture once in the while.
y y y y y
To start recording, press 0 0 0 0 0 REC (4, 50) on the CD-Re-
corder and immediately start the source (from the Stop-
mode).
The track number and recording time left appear on the display.
• To record a 3-second silence at the start of a track,
press 2/; PLAY/PAUSE (6, 47) on the CD-Recorder
before starting the source.
• To check the elapsed recording time, press DISPLAY
(17, 42) on the CD-Recorder.
u u u u u To stop recording, press 9 9 9 9 9 STOP (5, 48) on the CD-Re-
corder.
• If 9 STOP (5, 48) was pressed within 3 seconds after
0 REC (4, 50), no recording will take place.
BAND MEMORY DISPLAY TIMER
ERASE FINALIZE OPEN/CLOSE OPEN/CLOSE
appears on
.
MULTI JOG (PUSH ENTER)
VOLUME
AMP + -
OPEN/CLOSE
STOP PLAY/PAUSE DISPLAY MENU/STORE CANCEL/DELETE PROGRAM
t
• To interrupt recording, press 2/; PLAY/PAUSE (6,
48) on the CD-Recorder. Press 0 REC (4, 50) to
resume.
After recording the display will show
eral seconds.
NOTE:
- Connecting to SR2100 by system connection, you can
operate this recorder from the SR2100 remote control-
ler.
- You can listen to the other sound from the other
source, for example, radio on the SR2100 or DVD on the
DV2100 during the internal recording on the DR2100.
Important:
- If you want to play the recorded CDR disc on any regu-
lar CD player, it must first be finalized. (See FINALIZ-
ING/UNFINALIZING page 14.)
- Sound might be distorted when the recording levels are
set more than 0 dB for digital and –12dB for analog re-
cording.
- The foctory settings are 0 dB for digital and –12dB for
analog recording.
- The rec level will remain for next time.
Please check the rec level before start recording.
- Finalized CD-RW discs play only on CD-RW compatible
CD players.
13
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
SPACE
DISPLAY SCROLL
CDR CDR CD CD
MENU MENU
CANCEL CANCEL
u
TR.INCR. REC REC TYPE SOURCE
y
SCAN DIMMER ENTER
e
r
for sev-