Connecting The Power Cord; Basic Operation; Before Use; Turning The Power On - Marantz PM5004 User Manual

ENGLISH

Connecting the power cord

Wait until all connections have been completed before connecting the
power cord.
To household power
(AC 230 V, 50 Hz, 60 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not use any cord other than the provided power cord.
8

Basic operation

Symbols used to indicate buttons in this manual
Button located on both the main unit and
outlet
the remote control
Button only on the main unit
Button only on the remote control
<ON/OFF> <INPUT SELECTOR>
Power
indicator
SOURCE DIRECT
PHONES
<BASS>
jack
<SPEAKERS A/B>
SOURCE DIRECT
[INPUTd,f]

Before use

1
BUTTON
<BUTTON>
2
[BUTTON]
Input
indicators
<LOUDNESS>

Turning the power on

VOLUME
Press
• Power is turned on.
• Input indicator for the selected source lights.
• The unit will be ready to start playback after several seconds.

Turning the power standby

Press
• The power is set to the standby mode.
<TREBLE> <BALANCE>
• The Power indicator lights in red.
• Press
[POWER OFF]
• You can also turn on power by using either
[INPUT
[POWER ON]
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press
power, or unplug the power cord from the power outlet.
VOLUME

Turning the power off

Press
[MUTE]
• Power is turned off.
• All indicators will turn off.
VOLUME
Turn the all the way down.
<BASS> <TREBLE> <BALANCE>
Set , and
center positions.
<ON/OFF>
.
.
[POWER OFF]
[POWER ON]
to turn on power from standby mode.
<INPUT SELECTOR>
d , f ]
from standby mode.
<ON/OFF>
<ON/OFF> .
to the
or
to turn off the