To Set The Clock - La Crosse Technology WS-9625U-IT Instruction Manual

To set the clock:

1. The hour digits start flashing in the time display section.
2. Use the + key to adjust the hours and then press SET key to go to the minute setting.
3. The minute will be flashing. Press the + key to just the minutes.
4. Confirm with the SET key and enter the "Calendar Setting" or exit the setting mode by
pressing the CH key
Note:
Daily WWVB reception (Atomic time) is attempted at full hour between 12:00 am to 6:00 am. If
the reception is successful, there will no reception attempt until the following day. When this is
successful, the received time will override the manually set time. The date is also updated with
the received time.
32