Time Is Off By Hours; Supported Time Zones; Manually Set Time/Date: Program Menu - La Crosse Technology 616146V4 Faqs

Time is off by hours

• Check to see if the
the Atomic Projection Alarm has not received a WWVB time signal in the past 24 hours.
• Reposition the Atomic Projection Alarm with the front or back facing Colorado.
• Check that the
Time Zone
zone in the Program
• Check that the DST indicator is correct for your location (most areas observe DST so
this should be ON). Adjust the DST indicator in the
• Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or
radio equipment make it difficult to receive the WWVB time signal.

Supported Time Zones

Explanation: This atomic projection alarm offers a choice of seven time zones:
• AST=Atlantic
• EST= Eastern
• CST= Central
• MST= Mountain
• PST= Pacific
• AKT= Alaska
• HAT=Hawaiian
The atomic projection alarm works in North America. Outside of North America, the
projection alarm will not receive a WWVB signal, but will keep time like a quartz clock.

Manually Set Time/Date: Program Menu

The SET/°F/°C button will move through the program menu. The +/TEMP or -/TIME buttons
will change a value.
1. WWVB ON/OFF: Hold the SET/°F/°C button 5 seconds and WWVB and the word ON
will flash. Press and release the +/TEMP or -/TIME button to turn this to OFF if you do
not wish WWVB reception. Confirm with the SET/°F/°C button and move to the next
item.
2. TIME ZONE: EST will flash. Press and release the +/TEMP or -/TIME button to select a
different Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST=
Pacific, AKT= Alaska, HAT=Hawaiian time zone. Confirm with the SET/°F/°C button and
move to the next item.
3. DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the
+/TEMP or -/TIME button to turn this to OFF if you do not observe DST. Confirm with the
SET/°F/°C button and move to the next item.
4. 12/24 HOUR TIME: 12H will flash. Press and release the +/TEMP or -/TIME button to
select 24H. Confirm with the SET/°F/°C button and move to the next item.
5. HOUR: The hour will flash. Press and release the +/TEMP or -/TIME button to select the
correct hour. Confirm with the SET/°F/°C button and move to the next item.
La Crosse Technology, Ltd.
WWVB Tower icon appears on the Atomic Projection Alarm. If not,
selected correctly reflects your location. Adjust the time
Menu.
www.lacrossetechnology.com/support
Program Menu.
Page 9