Table of Contents
Advertisement
Up to 1 inch of rainfall:
•
Each segment indicates 0.1 inch of rainfall.
•
The graph will represent 1 inch.
Over 1 inch of rainfall:
•
The graph will represent 2 inches of rainfall at a time.
•
Each segment indicates 0.4 inches of rainfall.
•
Cylinder graph will read up to 70 inches of rain. Over 70 inches of rain, the graph will show
full.
Your station offers a programmable 24-hour rainfall alert.
1. Hold the RAIN/ALERT button for 3 seconds to enter the alert settings mode.
2. Alert OFF will show. Use the - or +/MODE button to turn ON the rainfall alert.
3. When ON is selected the 24-hour rain alert value will show. Use the - or +/MODE buttons to
Adjust alert value.
4. Press the RAIN/ALERT button to confirm and exit.
o When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.
o The flashing alert icon will indicate alert.
o Press any button to stop the temp alert sound.
Disarm alert:
1. Hold the RAIN/ALERT button for 3 seconds, until you see Alert ON.
2. Press the - or +/MODE button to turn alert OFF.
3. Press RAIN/ALERT to exit.
o At the beginning of a rain event (NOW), the rain drop icons will flash indicating current
rainfall.
o The drops will continue to flash until the NOW reading reaches zero.
o This is a silent alert. Your station will not beep, just the raindrops will flash.
o This silent alert cannot be deactivated.
•
Hold the HISTORY/TIME HISTORY/TIME SET Button to enter the settings menu.
•
Move through settings with the TIME HISTORY/TIME SET Button.
•
The +/MODE or - button will adjust settings.
ALERT: 24 HOUR RAINFALL ALERT
ALERT SOUNDS | DISARM ALERT
NOW RAIN ALERT
HOW DO I MANUALLY SET THE TIME?
5 |
P a g e
Advertisement
Table of Contents
