Maxtor DiamondMax Plus9 60GB AT Product Manual page 59

ATA Bus Interface and ATA Commands
Word
83 7:
6:
5:
4:
3:
2:
1:
0:
84 Command set/feature supported extension.
15:
14:
13-8:
7:
6:
5:
4:
3:
2:
1:
0:
85 Command set/feature enabled.
15:
14:
13:
12:
11:
10:
9:
8:
5-10 Maxtor DiamondMax Plus9 60/80/120/160/200GB AT
Table 5-2
Identify Drive Command Parameters
CONTENT DESCRIPTION
See Address Offset Reserved Area Boot, INCITS TR27:2001
1 = SET FEATURES subcommand required to spinup after power-up
1 = Power-Up In Standby feature set supported
1 = Removable Media Status Notification feature set supported
1 = Advanced Power Management feature set supported
1 = CFA feature set supported
1 = READ/WRITE DMA QUEUED supported
1 = DOWNLOAD MICROCODE command supported
Shall be cleared to zero
Shall be set to one
Reserved
1 = WRITE DMA QUEUED FUA EXT command supported
1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands
supported
1 = General Purpose Logging feature set supported
1 = Streaming feature set supported
1 = Media Card Pass Through Command feature set supported
1 = Media serial number supported
1 = SMART self-test supported
1 = SMART error logging supported
Obsolete
1 = NOP command enabled
1 = READ BUFFER command enabled
1 = WRITE BUFFER command enabled
Obsolete
1 = Host Protected Area feature set enabled
1 = DEVICE RESET command enabled
1 = SERVICE interrupt enabled