Maxtor DiamondMax Plus9 60GB AT Product Manual page 15

General Description
Performance
• Average seek time of <9.3 ms
• Average rotational latency of 4.18 ms
• New Ultra ATA interface with Maxtor-patented Ultra ATA/133
protocol supporting burst data transfer rates of 133MB/s
• Serial ATA interface with transfer speeds up to 150MB per second
• 2 MB and 8MB Cache buffer with 1.9MB (approximate) Advance
Cache Management (ACM)
• Look-ahead DiskCache feature with continuous prefetch and
WriteCache write-buffering capabilities
• AutoTask Register update, Multi-block AutoRead, and Multi-block
AutoWrite features in a custom ASIC
• Read-on-arrival firmware
• Quadruple-burst ECC, and double burst ECC on-the-fly
• 1:1 interleave on read/write operations
• Support of all standard ATA data transfer modes with PIO mode 4
and multiword DMA mode 2, and Ultra DMA modes 0, 1, 2, 3, 4,
5 and 6
• Adaptive cache segmentation
• 100% FDB (Fluid Dynamic Bearing Motors)
Reliability
• Automatic retry on read errors
• 320-bit, non-interleaved Reed-Solomon Error Correcting Code
(ECC), with cross checking correction up to fifteen separate bursts
of 10 bits each totalling up to 150 bits in length
• S.M.A.R.T. 4 (Self-Monitoring, Analysis and Reporting Technology)
• Transparent media defect mapping
• High performance, in-line defective sector skipping
• Reassignment of defective sectors discovered in the field, without
reformatting
• Shock Protection System to reduce handling induced failures
• Data Protection System to verify drive integrity
• Quiet Drive Technology (QDT)
Versatility
2-2 Maxtor DiamondMax Plus9 60/80/120/160/200GB AT