Before You Begin - Maxtor DiamondMax Plus9 60GB AT Product Manual

Table of Contents

Advertisement

Before You Begin

Thank you for your interest in Maxtor hard disk drives. This manual provides technical infor-
mation for OEM engineers and systems integrators regarding the installation and use of
Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For
repair information, contact the Maxtor Product Support Center at 1-800-2MAXTOR.
CAUTION
Maxtor hard drives are precision products. Failure to follow these precautions
:
and guidelines outlined here may lead to product failure, damage and invalidation
of all warranties.
1
unpacking or handling a drive, take all proper electro-static discharge
BEFORE
(ESD) precautions, including personnel and equipment grounding. Stand-alone
drives are sensitive to ESD damage.
2 BEFORE removing drives from their packing material, allow them to reach room
temperature.
3 During handling, NEVER drop, jar, or bump a drive.
4 Once a drive is removed from the Maxtor shipping container, IMMEDIATELY
secure the drive through its mounting holes within a chassis. Otherwise, store
the drive on a padded, grounded, antistatic surface.
5 NEVER switch DC power onto the drive by plugging an electrically live DC source
cable into the drive's connector. NEVER connect a live bus to the drive's inter-
face connector.
6 ELECTRICAL GROUNDING - For proper operation, the drive must be securely fas-
tened to a device bay that provides a suitable electrical ground to the drive base-
plate.
Please do not remove or cover up Maxtor factory-installed drive labels. They contain infor-
mation required should the drive ever need repair.Thank you for your interest in Maxtor hard
disk drives. This manual provides technical information for OEM engineers and systems inte-
grators regarding the installation and use of Maxtor hard drives. Drive repair should be per-
formed only at an authorized repair center. For repair information, contact the Maxtor
Customer Service Center at 800-2MAXTOR or 1-303-678-2015.
Corporate Headquarters:
500 McCarthy Blvd.
Milpitas, California 95035
Tel: 408-894-5000
Fax: 408-362-4740

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents