2.) HANDLEBAR INSTALLATION
3.
Slide axle thru left fork, then spacer before
inserting it into the left side of front wheel.
4.
Secure with nut on right side (brake side)
and tighten securely
1.
Locate and remove the handlebar bolt,
washer & nut as shown above.
2.
Slide handlebars over post in the correct
position, then insert the bolt & concave
washer into the front (speedometer side) of
the handlebars and secure with nut on the
back (riders side). Concave washer should
be partially inserted into the handlebar and
make contact with internal post to be
tightened properly and securely.
8