Setting Up The Tuning Step Increment - Sangean PR-D14USB User Manual

Manual tuning – AM / FM
. Press the Standby button to switch on your radio.
. Press and release the Source button to select AM or FM radio
mode.
3. Press the Tuning Up / Down button to tune to a station. The FM
frequency will change in steps of 100kHz / 50kHz and AM frequency
will change in steps of 0kHz / 9kHz.
4. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
5. Use the Volume control to adjust the sound level as required.

Setting up the tuning step increment

. Press and hold the Info / menu button to enter the menu setting
when the radio source is in AM / FM mode.
. Press the Tuning Up / Down until FM xxK or AM xxkHz appears
on the display, and press and release the Scan button to enter
the step increment setting.
3. Press the Tuning Up / Down to select 50K / 00K for FM radio,
and 9kHz / 0kHz for AM radio. Then press and release the Scan
button to confirm the setting.
GB
8