Selections Of Heat/Cool, 5 Min Delay Off/On Span 0.5/1S; Heat Mode - Salus 091FLRF User Manual

Programmable room thermostat with rf (volt free)

Hide thumbs Also See for 091FLRF:

Table of Contents

7, Selections of Heat/Cool, 5 min Delay Off/On Span

0.5/1s

Press OK button for approximate 5S for these selections

Heat Mode : Heat icon flashing, press OK to confirm Heat mode or

press Comfort or Econmic, then press OK to change to Cool mode.

To select whether a heating or a cooling system to be controlled.

Note that normally for a heating system the comfort temperature

is higher than the economy temperature, while it is reverse for a

cooling system.

Delay On: press OK to confirm Delay On mode, or press Comfort

or Econmic, then press OK to change to Cool mode.

With this switch set to On, the external system will switch on only

if it has been off for more than 5 minutes. If cooling system is

selected, this function will be activated automatically.

Span 0.5 C: press OK to confirm Span 0.5C, or press Comfort

or Economic, then press OK to change to Span 1.0C.

Table of Contents

Show Quick Links

Table of Contents