S Can D Elete /A Dd; P Riority -C Hannel S Elect - Kenwood NEXEDGE NX-700 Instruction Manual

S d /A
cAn eleTe dd
You can add and remove zones and/or channels/group IDs to and from your scan
list.
1 Select your desired zone and/or channel/group ID.
2 Press the key programmed as Zone Delete/Add (to add/remove zones) or
Scan Delete/Add (to add/remove channels/group IDs).
• You can also press and hold the key programmed as Scan Delete/Add to add/
remove zones.
p -c
rioriTy hAnnel
If the Priority channel has been set as Operator Selectable by your dealer, you
can reprogram the Priority channels.
1 Select your desired zone and channel/group ID.
2 Press the key programmed as Priority-channel Select.
3 Press / to select "NORMAL", "PRIORITY " (
"PRIORITY &2" (
4 Press to save the setting and exit.
S
elecT
).
), "PRIORITY 2" ( ), or
3