Menu Mode; M Enu A Ccess; M Enu C Onfiguration - Kenwood NEXEDGE NX-700 Instruction Manual

Many functions on this transceiver are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
m A
enu cceSS
1 Press the key programmed as Menu.
2 Press / to select a Menu item.
• If you are using a microphone keypad, you can enter a Menu number directly.
3 Press to set up the selected Menu item.
4 Press / to select your desired setting.
• For settings with more than  level, repeat steps 3 and 4.
5 Press to set the selected setting and exit Menu mode.
• Press at any time to return to the previous display.
• Press at any time to exit Menu mode.
m c
enu onFigurATion
Some transceiver keys may already be programmed with functions listed in the
Menu. Those functions can be accessed directly by pressing the key. All other
functions can still be accessed using the transceiver Menu. The following table
lists the available Menu items.
No. Menu
0 2-TONE
02 AUTO REPLY MSG
03 AUTO TELEPHONE
04 AUTO DIAL
05 AUTO DIAL PROG
06 AUX A
07 AUX B
08 BROADCAST
09 CLOCK
0 CLOCK ADJUST
 DIRECT CH SEL
2 DISP FORMAT
3 FIXED VOLUME
4 FORCED SEARCH

MENU MODE

Description
2-tone Mode
Auto Reply Message ON/OFF
Auto Telephone
Autodial Mode
Autodial Programming Mode
AUX A ON/OFF
AUX B ON/OFF
Broadcast ON/OFF
Clock ON/OFF
Clock Adjustment mode
Direct CH/GID  ~ 5 Select
Display Format ON/OFF
Fixed Volume
Forced Search
9