D Isplay - Kenwood NEXEDGE NX-700 Instruction Manual

⑫
key
Press to activate its programmable function {page 6}. The default is Zone Up.
⑬
key
Press to activate its programmable function {page 6}.
⑭
Speaker
Internal speaker
⑮
PTT (Push-to-Talk) switch
Press and hold this switch, then speak into the microphone to call a station.
d
iSplAy
Indicator
Monitor or Squelch Off is activated.
Blinks when an incoming call matches your Optional Signaling.
The current zone (left icon) or CH/GID (right icon) is added to
scan.
Scan is in progress. Blinks while scan is paused.
A message is stored in memory. Blinks when a new message
has arrived.
The current channel is a Priority channel.
Operator Selectable Tone (OST) is activated.
A Telephone ID call is being received. Blinks during Auto
Telephone Search.
Talk Around is activated.
Site Lock is activated.
Signal strength indicator {page 20}.
Scrambler/ Encryption is activated.
Auto Recording on the VGS- option is activated.
Auto Reply Message is activated.
The AUX A function is activated.
Lone Worker is activated.
The AUX B function is activated.
Description
5