Connections; Touch Screen; Cd/Dvd Drive - Jeep Navigation User Manual

Connections

Never force any connector into the ports of your radio.
Make sure your connectors are the correct shape and size
before you connect.
Any attached cable should be routed so that it will not
apply any pressure to the connection.
Do not use a USB device which will interfere with the
operation of opening the display.

Touch Screen

Do not touch the screen with any hard or sharp objects,
which could scratch the touch screen surface (pen, USB
stick, jewelry, etc.)!
NOTE: It is possible to use a plastic stylus for press
screen enabled devices such as PDA and Pocket PCs.
Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touch screen.
If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an iso-
propyl alcohol and water solution ratio of 50:50. Be sure
to follow solvent manufacturer's precautions and
directions.

CD/DVD Drive

Do not insert any damaged, warped, scratched or dirty
CDs or DVDs into the CD/DVD player.
Discs that have been modified with an adhesive label
should not be used in the CD/DVD player.
Do not insert more than one CD/DVD at a time into the
drive slot.
Do not insert anything other than the supported CD/
DVD formats. See Disc Mode section for information on
supported CD/DVD formats.
NAVIGATION 7