Redial; Call Continuation - Jeep Navigation User Manual

2. If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone dependent.
3. To bring the call back from hold, press and hold the
UConnect button until you hear a single beep.

Redial

1. Press the UConnect hard-key to begin.
2. Wait for the beep.
3. Say REDIAL.
4. The UConnect system will call the last number that
was dialed on your cellular phone.
NOTE: This may not be the last number dialed from the
UConnect system.

Call Continuation

Call continuation is progression of a phone call on the
UConnect system after the vehicle ignition key has been
switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:
1. After the ignition key is switched OFF, a call can
continue on the UConnect system either until the call
ends or until the vehicle battery condition dictates cessa-
tion of the call on the UConnect system and transfer of
the call to the mobile phone.
2. After the ignition key is switched to OFF, a call can
continue on the UConnect system for certain duration,
after which the call is automatically transferred from the
UConnect system to the mobile phone.
3. An active call is automatically transferred to the
mobile phone after ignition key is switched to OFF.
NAVIGATION 109