Removing A Disc; Selecting Disc Mode; Scan Search; Next Track - Jeep Navigation User Manual

Removing a Disc

1. Press the OPEN/CLOSE hard-key.
2. The disc is ejected and can be removed.
NOTE: If the disc is not removed within approximately
10 seconds, the unit pulls it back into the slot (park
position). The disc may be ejected when the ignition is
OFF.
3. Press the OPEN/CLOSE hard-key to close the display.
The display will close automatically within 30 seconds
after the disc is removed.

Selecting Disc Mode

Toggle between the media and the radio menus by
pressing the RADIO/MEDIA hard-key. The disc mode
can be selected by touching the Disc tab soft-key.
NOTE: When a disc is inserted, the appropriate mode is
automatically selected once the disc is recognized.

Scan Search

Touch the SCAN soft-key.
The individual tracks of the disc will be played in
succession for eight seconds each.
Select STOP SCAN soft-key to stop the scan function.

Next Track

Press the SEEK up hard-key. The next track on the disc is
played. Once the last track has been reached in the
forward direction, the unit will loop back to the first
track.
Previous Track
Pressing the SEEK down hard-key plays the previous
track. If the first track has been reached in the backward
direction, the unit will switch from the first track to the
last track. If a track has been playing for more than one
second when the SEEK down hard-key is pressed, the
unit will skip back to the beginning of the current track.
NAVIGATION 33