Electronic Vehicle Information Center (Evic) - Jeep Navigation User Manual

10 NAVIGATION
(3) RADIO/MEDIA Press the RADIO/MEDIA hard-key
(3) to toggle between RADIO and MEDIA mode.
(5) Voice Recognition (VR) Press the VR hard-key (5)
and wait for the confirmation beep before you say a voice
command.
(6) UConnect (optional) Press the UConnect hard-key
(6) to either activate the UConnect system or to cancel
an active phone call.
NOTE: If you are in one of the navigation menus (NAV
Menu, MAP display, etc.), you need to press the
UConnect hard-key twice to end an active call.
(7) MENU Press the MENU hard-key (7) to access the
system settings menu.
NOTE: Press the MENU hard-key in an active mode in
order to change mode specific settings.
(8) NAV Press the NAV hard-key (8) either to switch to
the navigation mode or to toggle between the navigation
menu and the map viewer menu.
(9) USB Connector Connect a supported device into the
USB Connector (9) in order to copy files to the internal
hard disk drive.
NOTE: See USB Connector section for information on
supported devices in the Remote Devices section.
(10) AUX Connector Connect an external audio device
into the AUX Input (10) (e.g., MP3 player, video-game),
to play the device audio through the car audio system.

Electronic Vehicle Information Center (EVIC)

Some vehicles feature an Electronic Vehicle Information
Center (EVIC) with driver-interactive display. The EVIC
is normally located in the instrument cluster or overhead.