Call by Saying a Name
1. Press the UConnect hard-key to begin.
2. Wait for the beep.
3. Say CALL.
4. When prompted, after the beep, say the name of the
person you want call.
For example, you can say "John Doe," where John Doe is
a previously stored name entry in the UConnect phone-
book. Refer to section "Add Names to Phonebook," to
learn how to store a name in the phonebook.
5. The UConnect system will ask you to confirm the
name and then dial the corresponding phone number,
which will appear in the display of the navigation radio.
Phonebook
Accessing the phonebook can either be done using the
touch screen (see Address Book section in this manual) or
using voice commands.
The UConnect PHONEBOOK accesses the same data-
base as the navigation radios ADDRESS BOOK.
Add Names to Phonebook
Adding names to phonebook is recommended when the
vehicle is not in motion.
1. Press the UConnect hard-key to begin.
2. Wait for the beep.
3. Say PHONEBOOK.
4. When prompted, after the beep, say NEW ENTRY.
Use of long names helps the voice recognition and is
recommended. For example, say "Robert Smith" or "Rob-
ert" instead of "Bob."
NAVIGATION 103